Modules tutorials, source code, frizting parts, specifications and connection diagram for Arduino sensors. Arduino using Entry Level products: easy to use and ready to power your first creative projects. These boards and modules are the best to start.
Create an Arduino project in less than one minute for beginner! Here are 15 grove modules that I personally love and used as a Arduino
Ultrasonic Sensor Transmitter(GL 40-2T) + Receivers(GL40-2R)
Original price was: ₹599.00.₹349.00Current price is: ₹349.00.Ultrasonic Sensor Transmitter(GL 40-2T) Receivers(GL40-2R)- Nominal frequency (KHz): 40KHz
- Emission sound pressure at10V (0dB = 0.02mPa): ≥110dB
- Receiver sensitivity at40KHz (0dB = V / ubar): ≥-75dB
- Capacitance at1KHz, <1V (PF): 800 ± 30%
- The part with T is the Transmitter; the part with R is Receiver
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
Original price was: ₹391.00.₹320.00Current price is: ₹320.00.Arduino Board – Nex Electronics
APDS9900 Gesture Sensor Module I2C APDS-9900
Original price was: ₹248.00.₹234.00Current price is: ₹234.00.Arduino Board – Nex Electronics
Voltmeter-Ammeter DSN-VC288
Original price was: ₹290.00.₹185.00Current price is: ₹185.00.Features of VC288
- Working voltage of Meter itself : DC 4 – 30V (The maximum input voltage can not exceed 30V. Otherwise the meter will be burned)
- Working current of Meter itself : =20mA
- Voltage Measuring range : DC 0 – 100V
- Current Measuring range : DC 0 – 100A
- Voltage resolution (V) : 0.1V
- Current resolution (A) : 0.1A (Measuring current<10A), 1A (Measuring current>=10A)
- Measure accuracy : 0.1% (± 1 digit)
- Display : 0.28″ digital tube, Two color blue and red
- Refresh rate : about 300mS / times
- Dimensions : 48mm*29mm*26mm
- Operation Temp : -10oC- 65oC
3S 20A 18650 3 Series Lithium Battery Protection Board 11.1V 12V 12.6V
Original price was: ₹290.00.₹149.00Current price is: ₹149.00.- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
Power Bank Charging Module Circuit Board
Original price was: ₹225.00.₹145.00Current price is: ₹145.00.- Input:5V 1A
- Output:5V 1A or 5V 2A
- Input Interface:Micro USB
Installation Intstructions:
1.Circuit board B- connects power negative,B connects positive. Don’t inversely connect,it will result in burning of board.Make sure there is insulation between power and circuit when install the battery
2. Press and hold the switch,flashlight LED light starts,then press and hold to turn it off
3. 2A output is not continuous current,it changes according to USB connecting load, automatic current output as per load
4. If battery is connected incorrectly, the reverse polarity will burn the circuit.So, make sure to check the battery polarity when connecting.Bluetooth Board Module with inbuilt MP3 Decoding / SD Card Slot / USB / FM / & Remote Control
Original price was: ₹230.00.₹135.00Current price is: ₹135.00.- Comes with IR Remote Control
- Stereo Digital Audio Output
- Can be used as an audio receiver
- Support USB/TF Card Slot/Bluetooth/FM/AUX switching, also supports folder selection and playback
- Stereo Bluetooth with a call can also receive hands-free calls
Features:
- Comes with IR Remote Control
- Stereo Digital Audio Output
- Can be used as an audio receiver
- Support USB/TF Card Slot/Bluetooth/FM/AUX switching, also supports folder selection and playback
- Stereo Bluetooth with a call can also receive hands-free calls
- DIY speakers and modified audio/car rare weapon
- Support MP3/WMA/WAV/FLAC/APE format music.
- Can be used to play songs from USB, SD card, Bluetooth, and FM radio.
5V-15V Buck Converter Module Red GLC1239
Original price was: ₹190.00.₹120.00Current price is: ₹120.00.- Adjustable Buck Converter
- Model No: GLC1239
- Input Voltage Range 5v-15v
- Default output voltage 1.2v, 3A
- Dimension 26mm x 17mm
CH340G USB To TTL (Serial) Converter Module
Original price was: ₹190.00.₹120.00Current price is: ₹120.00.Features
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- USB to TTL conversion board used for STC microcontroller download DVD/ hard disk/router /GPS upgrade
- For STC Download: SCM must be a minimum system and external crystal oscillator